Heating, Cooling and Air Conditioning Systems

Air Handling Unit




Capacity Range:

  • Classified D1/L2/F9/T2/TB2 (in compliance with Eurovent EN 1886)
  • Double skin type panels with a uniform thickness of 50 mm
  • Galvanised steel inner skin with 0,80mm thickness
  • Sheet steel outer skin, pre-painted in RAL 7037 colour with an epoxy primer undercoat and a 25 micron thick polyester topcoat.
  • Stainless steel electrical heater
  • The coils with copper tubes and aluminium fins.
  • Forward /Backward curved fans with double inlets and dynamically and statically balanced in compliance with VDI 2060 standards
  • The motors with internal thermal overload protection (TOP) sensor as standard.
  • Rock wool, glass wool or polyurethane foam panel
  • Electronic frequency inverter plug fans
  • Regulation valve kits and electrical board assembly.
  • M0 classified connection frame and flexible connectors.
  • Inner skin in aluminium or stainless steel.
  • Fresh air louvre
  • Sand louvre.
  • Inclined or U shaped manometers.
  • Empty sections with different lengths.
Thermal Performance T5 T4 T3 T2 T1
Thermal Bridging Factor TB5 TB4 TB3 TB2 TB1
Filtre By-Pass Lealage G1-G4 F5 F6 F7 F8 F9
Casin Air Tightness L3 L2 L1
Casing Mechanical Resistance D3 D2 D1