Open Circuit Cooling Towers (PMM)

thumbnail-image
View Product Catalog
View References

Modular Design, Maximum Performance!

Offered with Atlantik Grup’s advanced engineering expertise, MİTA PMM Series Open Type Cooling Towers provide ideal solutions for large-scale cooling projects with their high capacity, modular, and flexible design.

Key Features

Power Plants,

Airport Applications

Easy On-Site Installation

Thanks to Modular Design

Environmentally friendly

construction using 71% recycled materials.

Capable of operating

even at 80°C water inlet temperature

(2.6-14 MW)

With or Without Basin (PMM)
With or Without Lower Frame

  • Motor-fan (axial) group with gearbox reducer, low installed power, possibility of low noise levels, IP 56
  • Siemens motors
  • Casing made of FRP sandwich panels, thickness 22 mm
  • Metal frame in hot dip galvanized steel after fabrication (galvanization process in accordance with UNI EN ISO 1461-99 regulation, thickness not inferior to 80 micron)
  • Water distribution system in PVC, PP or PE equipped with non-clogging PP spray nozzles
  • Fill pack with different kinds of air/water channels, suitable for the use with different water types
  • Certified PP drift eliminators (entrainment 0,01%)
  • Each unit is equipped with 2 big man-sized access doors for an easy access to the internal components
  • For every order a static and dynamic structural analysis is carried out, considering seismic factors
  • 19 mm (PVC or PP*) fill material for industrially clean water, with maximum temperatures of +55 °C (PVC) and peaks up to +80 °C (PP)
  • GS-L (PVC also available for high temperatures) panels for dirty water, developed by MITA to provide maximum heat transfer by combining an effective splash effect to a film component
  • GS (PP) grids for very dirty water (suspended solids and colloids witha diameter <200/300 microns, concentration <1000 mg / l) and with a maximum peak temperature of +80 °C