Air Handling Unit
- Classified D1/L2/F9/T2/TB2 (in compliance with Eurovent EN 1886)
- Double skin type panels with a uniform thickness of 50 mm
- Galvanised steel inner skin with 0,80mm thickness
- Sheet steel outer skin, pre-painted in RAL 7037 colour with an epoxy primer undercoat and a 25 micron thick polyester topcoat.
- Stainless steel electrical heater
- The coils with copper tubes and aluminium fins.
- Forward /Backward curved fans with double inlets and dynamically and statically balanced in compliance with VDI 2060 standards
- The motors with internal thermal overload protection (TOP) sensor as standard.
- Rock wool, glass wool or polyurethane foam panel
- Electronic frequency inverter plug fans
- Regulation valve kits and electrical board assembly.
- M0 classified connection frame and flexible connectors.
- Inner skin in aluminium or stainless steel.
- Fresh air louvre
- Sand louvre.
- Inclined or U shaped manometers.
- Empty sections with different lengths.